Residential · Greensboro, NC
Pet screen is built for clawing, pushing, and daily wear that destroys standard fiberglass mesh. Greensboro Screens installs and repairs pet resistant screening for screen doors, patio enclosures, and window screens, so your openings stay secure and clear.
We start by checking the frame, spline channel, corners, and any bowing that causes loose mesh. Old screening and brittle spline are removed, the channel is cleaned, and we verify the frame is square before we cut and tension the new pet screen. We install pet resistant mesh (typically vinyl-coated polyester) and match spline diameter for a tight lock in the groove, then set final tension so the screen does not ripple or pop loose.
In North Carolina heat and humidity, screens can relax over time and frames can move, so we set even tension and avoid over-stretching that can pull corners out of square. For high-traffic doors and pet doors, we reinforce the perimeter and pay attention to latch-side alignment where most failures start. We can also replace bent frames, damaged corners, pull tabs, and worn rollers on sliding screen doors so the new mesh is not stressed by a dragging door. If you want more visibility, we will compare pet screen options against standard 18x16 fiberglass and heavy-duty meshes so you get the right balance of strength, airflow, and clarity.
Greensboro customers choose us because we treat pet screen as a system, not just new mesh. You get straightforward recommendations on mesh type, frame condition, spline fit, and whether a full rescreen or a new door makes more sense. Our team is licensed and insured, shows up with the right tools to tension and spline cleanly, and keeps the work area neat so your porch or entry stays usable. We also respect pet households, we confirm door closing and latching before we leave, and we do not oversell upgrades you do not need.
After installation, we do a full walkthrough: we check the perimeter seal, corners, and mid-rail areas, then test for slack by pressing and releasing the mesh to confirm it rebounds without pulling from the channel. On sliding units, we verify smooth travel, roller adjustment, and that the door hits the strike cleanly without rubbing the new screen. You receive a free written estimate up front, clear material selections, and a finished screen that is trimmed clean with no sharp edges or loose tails. If you have multiple openings, we can stage the work to minimize downtime and keep your home or business protected from insects.
Yes. We provide a free written estimate after reviewing the site, measuring openings, and confirming mesh and hardware options.
Yes. We handle single-panel repairs, individual window screens, and small rescreens without requiring a full project.
Common options include fiberglass insect mesh, aluminum screening, pet-resistant mesh, and solar screen. We will recommend the best fit based on traffic, pets, sun exposure, and visibility goals.
Yes. We build and retrofit screened-in porches, patios, and screen rooms, including framing repairs, screen door installs, and full rescreening of existing enclosures.
Many repairs and rescreens can be completed in a single visit once materials are confirmed. Larger porches and multi-panel enclosures may take longer depending on access, framing condition, and door work.
If your dog or cat keeps tearing through standard mesh, pet screen is the upgrade that holds up to claws, pressure, and daily traffic. Greensboro Screens installs and repairs pet resistant screening on window screens, screen doors, and porch or patio enclosures, using tight spline fit and even tension so the mesh stays seated in the frame. Whether you need one panel rescreened or an entire set of doors repaired, we focus on durability, clean edges, and proper door operation so the screen lasts.
Pet screen (often a vinyl-coated polyester mesh) is significantly stronger than common fiberglass insect screening, making it a smart choice for screen doors, lower window panels, and anywhere pets jump or lean. Installation quality matters as much as the mesh itself. If the frame is out of square, the spline channel is dirty, or the spline diameter is wrong, even the best pet screen can loosen, wrinkle, or pull free. We inspect the frame, clean the channel, and set tension evenly so the mesh lays flat and stays locked in place.
Repairs are not always just about the screen. Bent frames, cracked corners, missing pull tabs, and worn rollers can cause repeat failures, especially on sliding doors that drag or rack in the opening. We can replace damaged hardware, tune rollers, and confirm the latch-side alignment so the door closes smoothly without rubbing and stressing the mesh. For porch panels and larger openings, we confirm framing support and consistent tension across the span to avoid billowing and edge creep.
If you are comparing options, we will explain the tradeoffs between pet screen strength, visibility, and airflow, and help you decide where it makes sense to upgrade versus keep standard mesh. Once the work is complete, we walk you through the finished panels, check the perimeter seal, and verify door operation so you know exactly what was installed and why it will hold up. Contact Greensboro Screens to schedule pet screen installation or repair and request your free written estimate.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Greensboro. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
