Commercial · Greensboro, NC
Protect your pool deck, guests, and equipment with a properly built hotel pool enclosure that holds up to daily traffic and constant moisture. Greensboro Screens installs and repairs commercial-grade screen enclosures, doors, and panels with clean lines, code-aware detailing, and minimal downtime.
Prep starts with measurements that match the pool deck layout, door clearances, and service access points, then we verify the base can take anchor loads. We check slab condition, control joints, slope for drainage, and any existing footing or curb, then lay out post locations with string lines and laser levels. For installs, we set aluminum posts and beams plumb and square, drill with rotary hammer bits, and fasten with corrosion-resistant concrete anchors and stainless hardware where needed. For repairs, we isolate the failed bays, identify loose fasteners, bent members, and frame racking, then stabilize before re-screening or panel replacement.
Local humidity, chlorine off-gassing, and wind-driven rain can shorten the life of a hotel pool enclosure when the wrong materials are used. We specify powder-coated aluminum framing, stainless fasteners, and screen options that fit the job, including fiberglass mesh for visibility or heavier pet-resistant mesh in high-contact areas. Seams are tensioned to prevent flutter, corners are reinforced, and door closers, sweeps, and latches are set to reduce slamming and keep a consistent seal. We also address finish details that matter to guests and staff, like straight sightlines, clean trim, and hardware that operates smoothly after repeated use.
Greensboro customers choose us because we build commercial screens like a contractor, not a handyman. You get a licensed and insured crew that shows up on schedule, works safely around occupied facilities, and communicates with the property manager about access, quiet hours, and staging. Our estimates are written and specific, listing screen type, frame repairs, door hardware, and fastener standards so you can compare apples to apples. When we find hidden issues like cracked slabs, corroded anchors, or out-of-square frames, we explain options and pricing before work changes.
At closeout, we do a full walkthrough and test every door, latch, and panel line, checking for tight spline, smooth operation, and no gaps at thresholds. We clean up cutoffs and old mesh, haul debris, and leave the enclosure ready for housekeeping and pool operations. You receive a clear scope of work, material selections, and care notes for screen cleaning and hardware lubrication. If the project includes repairs, we document what was corrected so your maintenance team knows what to watch going forward.
Yes. We provide a free written estimate after reviewing the site, measuring openings, and confirming mesh and hardware options.
Yes. We handle single-panel repairs, individual window screens, and small rescreens without requiring a full project.
Common options include fiberglass insect mesh, aluminum screening, pet-resistant mesh, and solar screen. We will recommend the best fit based on traffic, pets, sun exposure, and visibility goals.
Yes. We build and retrofit screened-in porches, patios, and screen rooms, including framing repairs, screen door installs, and full rescreening of existing enclosures.
Many repairs and rescreens can be completed in a single visit once materials are confirmed. Larger porches and multi-panel enclosures may take longer depending on access, framing condition, and door work.
A well-built hotel pool enclosure reduces complaints, keeps bugs and debris off the deck, and helps your staff maintain a clean, guest-ready pool area. Greensboro Screens provides hotel pool enclosure installation and repair for properties that need commercial durability, clean appearance, and predictable scheduling. Whether you manage a limited-service hotel, extended-stay, or a full-service property, we build and service screened pool structures with materials and hardware selected for moisture, UV exposure, and daily use.
Hotel pool enclosures take a beating. Chlorine and salt systems accelerate corrosion, wet decks keep hardware damp, and guests push on doors and screens all day. We troubleshoot common failures like pulled spline, torn mesh at corners, racked frames that bind doors, and posts that loosen at the slab. On repair calls, we focus on structural stability first, then restore tension and alignment so the enclosure performs like it should, not just looks patched.
For new installs, we plan the layout around circulation, towel and chemical storage access, ADA-friendly pathways where applicable, and service entry for pool equipment. We use accurate layout tools, set frames plumb and square, and fasten to sound concrete with anchors chosen for the substrate condition. Screen is installed with consistent tension, reinforced at stress points, and finished with trim and hardware that stands up to frequent use.
If you need a hotel pool enclosure in Greensboro, NC, we make it straightforward, a written estimate, clear scheduling, and a final walkthrough that confirms doors, panels, and finishes. Tell us what problems you are seeing, torn screens, sagging panels, sticking doors, or storm damage, and we will recommend a repair or replacement plan that fits your property and budget.
Call now or send a request and we will reach out within one business day to schedule your free, no-obligation estimate in Greensboro. We assess the project, review the details, and give you a written quote before any work starts, so you know exactly what to expect.
Prefer to write? Contact us or head back to the home page.
